In the "Arrangez ça" chapter of part 6 of Silent Hill: Townfall, players join Simon in an alternate version of the CEG Tower to light a gas torch. This puzzle requires careful interaction with various mechanisms and the use of specific codes. The process begins with disabling an alarm, which involves retrieving a clue from a workbench on the right side of the room and then heading left toward an elevator to reach the second level. At the control station on the second level, a partially rusted box holds the key to the alarm controls. Players return to the ground floor and use the key to unlock the alarm control interface, located to the left of a red valve. The alarm code displayed on the screen is 77289, and a reference sheet previously obtained by the player shows the corresponding code as A5-D7. Entering this code and pressing "OK" disables the alarm, allowing progress with the puzzle. Next, players interact with a keyboard to the right of the valve and input the code E3E3, found at the top of the reference sheet. This action releases rotating clamps, which are necessary to align the gas pipe sections around the torch's metal structure. Proper alignment of the pipes requires rotating the valve in specific directions at different levels: twice to the left or right at ground level, once to the left on the second level, and twice to the left or right on the third and fourth levels. After aligning the pipes, players return to the ground floor and go back to the control station. They press "Arrivée gaz" followed by "Test du débit" to ensure all indicators turn green, confirming the gas flow is correct. Finally, players light the torch to complete the puzzle and advance further in the game.